The assembly process at Renton for B-29s used four moving assembly lines. The 1,000 B-29 produced is seen above.

Boeing making history

For 75 Years Boeing Renton has pushed the frontiers of aviation

In April 1942 Boeing opened a factory in Renton, and over the past 75 years it has produced some of the greatest advancements in aviation including the most technologically advanced airplane of World War II, the world’s first tankers, the world’s first successful commercial jet and one of the most advanced production systems in the world.

Renton was originally selected by the U.S. Navy as the assembly site for the Boeing PB2B Sea Ranger, a long range flying boat patrol bomber, and ground was broken for the new plant on the shores of Lake Washington in September 1941.

As World War II progressed, the U.S. Navy began to rely more on land based bombers rather than flying boats, resulting in the cancelation of the Sea Ranger program. Fortunately, this was not the end for the Renton plant.

While the Navy was looking for land based bombers, the U.S. Army Air Force was looking for a site to build the most technologically advanced airplane of the war — the Boeing B-29 Super-fortress bomber.

The Army constructed an airfield next to the plant and on December 30, 1943, a B-29 called the “Renton Girl” became the first of thousands of Boeing planes to make their first flight from the airfield. The production system devised to assemble the B-29 was one of the most modern in the world, making it possible for Boeing workers in Renton to achieve an amazing production record of 160 B-29s during July 1945.

After the war the plant reverted to government use, but Boeing returned in 1949 to build the C-97 Stratofreighter and later the KC-97 — the world’s first production aerial refueling tanker.

Following the KC-97 was one of the most important airplanes in aviation history. Given the Boeing model number 367-80, it would go down in history as the “Dash 80” — the prototype for the 707. The Dash 80 rolled out at Renton on 1954 and was christened by Bertha Boeing, wife of company founder William Boeing who was the guest of honor.

The Dash 80 lead to two different airplanes: the Air Force KC-135 Stratotanker, the world’s first jet tanker, and the 707, the world’s first successful commercial jet. Renton produced all 707s and KC-135s. The plant also built all of the 727s that followed — the first of which rolled out fifty years ago this month on November 27, 1962. That same year Boeing purchased the Renton plant from the Air Force.

In 1966 to accommodate assembly of the popular 727 and the highly anticipated Supersonic Transport, Boeing built the two high bay assembly buildings which dominate the site today.

In 1970, an economic downturn led the company to a number of diversification programs including hydrofoil boats. Renton built six USS Pegasus class Hydrofoil Missileships for the U.S. Navy as well as 24 commercial Jetfoils.

The airplane business turned up in the 1980s and Renton launched the 757, which along with the 767 introduced the two-crew “glass cockpit” to commercial aviation.

Following in the tradition of the B-29, Renton has been a proving ground for a number of highly effective production innovations, including the moving line and the “Move to the Lake” consolidating the resources of a once sprawling site into the major production buildings, putting engineering and other resources next to the production line.

Today Renton is the home of the 737 and the site continues to make history as one of the world’s most productive airplane assembly plants, going to a staggering 47 planes produced a month.

While in the midst of making commercial aviation history, Renton is also producing the P-8A Poseidon in the original buildings built by the U.S. Navy in 1941 — after 75 years the historic plant is finally building long range patrol planes for the U.S. Navy.

More in Marketplace

4 Reasons Why Summer Is a Great Time to Buy a Home

June is National Home Ownership Month and while there are always many… Continue reading

Low inventory and high buyer demand continue to push the local real estate market, says realtor Mary Lee.
Seattle Housing Market Forecast

What’s happening in the market and where are prices and interest rates headed?

From retaining walls to patios and landscapes, Seattle Rockeries will help you create a beautiful, useable space.
Building quality from the ground up

Retaining walls and hardscaping to make the most of your property

Connect2Classes Tested: 7 Steps to Better Photography

Take the fear out of using those digital camera functions with Hudson’s Photo Workshops

Strength and perseverance pays off following life-changing diagnosis

Dancer shows you can manage your health and life while pursuing your passions

Mary Lee
There is a Better Way to Sell Your Home

5 cutting-edge strategies for ultimate home sale success

Medical marijuana? Expert answers some common questions

From avoiding pesticides to skipping the ‘high,’ here’s what you need to know

A true neighborhood studio, Crescendo Dance Academy offers classes for children, youth and adults, in addition to a competitive dance program and an Artist in Residence program.
Transforming a passion for dance into a profitable business

Community benefits when entrepreneur’s calling becomes a career

In addition to being a key employer, Boeing also works to protect the environment, educate students, support veterans and military families, and more.
Boeing releases Community and Economic Benefits Report

Company’s wide-ranging influence includes employment, education, environment and charitable giving

Connect2Classes Tested: Michael Duarte-Pedrosa checks out the School of Visual Concepts

How to Write a Brilliant Creative Brief workshop lives up to its name

Search Advertising Remains One of the Best Ways to Reach Customers

Every search can be considered a signal of intent, giving advertisers a massive opportunity.

Boeing’s six-week Fabrication internship has hosted about 120 high school interns over the last five years.
Fabrication internship emphasizes STEM education among Puget Sound high schoolers

‘One-of-a-kind opportunity’ lets students explore manufacturing and engineering techniques